The basic unit shall be constructed of 300 series stainless steel. The dispensers shall be a drop-in, self-leveling design.
The counter top flange has four, high-impact, plastic guide posts to align plates. The unit is self-supporting, with vertical side panels and a bottom and top flange all welded to form the dispenser body. The stainless steel dispenser head will be suspended from the extension springs to support the stack of plates to be dispensed.
PDOS: Basic construction with an additional outer stainless steel shield which covers the spring mechanism and vertical channel guides.
PDOH: Basic construction with the addition of a base mounted heating element, thermally protected fan motor, perforated dispenser head for heat circulation, side mounted thermostat, flange mounted pilot light and on-off switch. A 6′ 16-3 cord set, NEMA 5-15P shall be provided.
SELF-LEVELING: The spring mechanism is easy to adjust. A combination of extension springs will be provided for field adjusting to the required dispensing height.