Our products are now available in Revit More Information.                        

  • Models:
  • BLH-2
  • BLH-3
  • BLH-4
  • BLH-5
  • BLH-6

Modular Unit – BLH Series

Open Base, Electrically Heated | Individual Controls | Optional Drain and Manifold

This attractive, functional unit keeps hot foods hot—at their peak of serving perfection. Your customers will see, taste and come back for the difference.

A wide range of attractive plastic laminate colors is available, or urethane painted panels to blend with any decor.

Quality construction provides years of reliable service. Complete re-liability—use as an individual unit or joined in a continuous serving line with our exclusive CAM LOCK™ system.

Specifications

TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished to a uniform finish with rolled front edge.

BODY: Frame construction shall be of hi-tensile square aluminum tubing, 1-1/4″, 1″ and 3″ extruded, vertical radius corners. Frame sections are all welded construction, ground and polished to a uniform finish. Body is complete with front panel, end panels and 8-5/8″ rear apron of plastic laminate on .050 aluminum. Owner to specify laminate finish. CAM LOCK™ locking system included with each unit to align and retain cart positioning, when two or more units are joined.

HOT SERVING UNIT: The cart is complete and includes a hot serving unit installed in the top. Constructed of 18 gauge, type 304 stainless steel. Individual 12″ x 20″ hot food wells are provided, fabricated of 18 gauge stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4″ radius. Each well is provided with an 850 watt heating element. The wells can be used with or without water, however, the use of water for a more efficient operation is recommended.

ELECTRICAL: The unit is provided with a prewired single thermostat control for each well, with a pilot light. A 6′-long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left. Available for single phase power only.

CASTERS: NSF approved, 5″ dia. non-marking rubber tired, swivel plate caster with grease fittings. Both casters on the operator’s side have foot-activated brakes.

Render

*Model Shown: BLH-DMVE-4 – Not representative of final product

Features

  • Attractive plastic laminate panels
  • Individually controlled thermostats
  • High wattage food wells, use wet or dry
  • Economical cost
  • CAM LOCK™ system

Certifications