The ice cream carts let your bring the profitability of reach-in ice cream service to your serving line. Ideal for ice cream or any frozen dessert, this unit can be located anywhere in your serving line. It’s fully self-contained—just plug it in and turn it on.
The attractive streamline design, plus the variety of laminates give you a wide range of choices to complement any decor. The unmatched feature of the CA-Cart line is the self-locking device which eliminates loose fasteners or molding strips to lock units together. Simply push the units together; the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.
TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. Top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.
BODY: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 aluminum. Owner to specify finish.
DEEP FREEZE COMPARTMENT: The cart is complete and includes a WDF series drop-in deep freezer installed in the top. Constructed of 18 gauge, type 304 stainless steel with raised perimeter bead and solid vinyl gasket. The unit is fully insulated with 2-1/2″ of high density polystyrene on all sides and enclosed with a 22 gauge galvanized steel outer liner. The inner liner has copper tubing firmly soldered to its exterior. The unit is provided with a double pan, insulated lid with a rubber, self-insulating hinge. The entire lid is removable.
REFRIGERATION SYSTEM: The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided, with hermetically sealed compressor and a thermostat control. The system is fully charged with CFC-free refrigerant and ready to operate.
ELECTRICAL: The unit will be wired for 15 amp, 120 volt, single phase operation with an on/off switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.
CASTERS: The casters shall be 5″ dia. non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.