Atlas Metal will be attending SNA ANC & NACUFS More Information.

Our products are now available in Revit More Information.

Atlas Metal will be closed on Memorial Day 2019 More Information.

  • Models:
  • DSRMBU-3240
  • DSRMBU-3254
  • DSRMBU-3268
  • DSRMBU-3285

Mobile Cold Serving Unit – DSRMBU Series

Buffet Style – Refrigerated Cold Pan

Keeps salads, sandwiches, desserts, chilled entrees or appetizers, fresh, crisp and appealing throughout the serving occasion. Your customers will see and taste the difference.

This attractive Designer Series unit can stand alone or become an integral part of your total serving system.

Quality construction, Atlas’ exclusive Reversa Panel and heavy gauge stainless steel tops promise years of cost efficient, trouble-free service.


TOP: Top constructed of 16 gauge, type 304 stainless steel, die-formed, welded, buffed and polished to a uniform finish. The cold pan will accommodate 12″ x 20″ pans of 2-1/2″ and 4″ depth, an fractional size pans. OMNI: The edge runs the full length of the top and consists of a double 45 degree angle with a polished finish.

LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are covered with a minimum 1/4″ radius. The liner has copper tubing firmly soldered to the top 3″ of all sides. A 3/4″ dia. drain with strainer, 4″ PVC nipple, and valve is provided.

INSULATION: The pan is fully insulated with high density polystyrene, 1″ thick on all sides, 1-1/2″ thick on the bottom and enclosed with a 22 gauge galvanized steel outer liner.

BODY: End mullions are die-formed, 18 gauge paint grip steel, all welded box beam construction. Interior sides are enclosed with 20 gauge paint grip steel panels attached to the end mullions. End mullions are joined at the top, front and rear by a 6-1/2″ apron running the full length of the unit. Corner sections are formed with 45 degree angles on all sides for the designer look. End mullions are joined at the bottom with a full length angle iron frame. Steel surfaces are finished with urethane based paint.

ALL SIDES: Constructed of rigidized honeycomb material with ply-shield plywood stringers. Panel is framed with 5/8″ x 1″ polyethylene and a plastic laminate front. Rear is finished with a backing sheet to insure watertight integrity. OMNI: 45 degree designer corners are painted bright gray with a urethane based paint solid color mica panels in operator’s choice. OAKWOOD: 45 degree designer corners are mirror finish brass-look. Light oak-look mica panels complete the appearance package. VISCAYA: 45 degree designer corners are mirror finish brass look. Rich mahogany-look mica front panels.

REFRIGERATION SYSTEM: A 1/4 HP (1/2 HP on DSRM-BU-3285 only) self-contained condensing with a hermetically sealed compressor is provided along with a factory pre-set temperature pressure control, which is field adjustable. The condensing unit is provided with an enclosure of 18 gauge steel. A removable grill is included for air circulation and access to the refrigeration system.

ADJUSTABLE CASTERS: NSF listed, 5″ dia. non-marking neoprene rubber tired swivel casters. Two casters have foot operated locking brakes. All Designer Series unit feature Atlas’ exclusive adjustable height, leveling casters.

LOCKING DEVICES: When two or more units are ordered. Atlas’ unique Lever-Latch locking system includes an exclusive interlocking stainless lock under the top counter ion the customer’s side and a positive action Lever-Latch on the operator’s side.

ELECTRICAL: 15 amp, 120 volt, 60 cycle, single phase operation with an illuminated on/off switch located on the operator’s side and a 6′-foot long, 3-wire cord and plug (NEMA-5-15P). A cord holder is provided, under the end mullion ion operator’s right, unless specified otherwise.



  • Reversa Panel easy access, reversible, interchangeable designer panels—available as an accessory
  • Stainless Steel Lever-Latch locking system
  • Adjustable height, leveling casters
  • Concealed, heavy-duty, non-marking neoprene wheels with locking brakes
  • Solid, die-cast brass or chromeplated brackets
  • Unibody construction with 45 degree designer look corner supports
  • Durable stainless steel tops
  • One person room-to-room mobility
  • Easy access flip top breath guards on all buffet units (available as an accessory)
  • All units fit through standard 36″ doors
  • Most flexible decor package in the industry