Keeps salads, sandwiches, desserts, chilled entrees or appetizers, fresh, crisp and appealing throughout the serving occasion. Your customers will see and taste the difference.
This attractive Designer Series unit can stand alone or become an integral part of your total serving system.
Quality construction, Atlas’ exclusive Reversa Panel and heavy gauge stainless steel tops promise years of cost efficient, trouble-free service.
TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, buffed and polished to a uniform finish. The cold pan will accommodate 12″ x 20″ pans of 2-1/2″ and 4″ depth, and fractional size pans. OMNI: The edge runs the full length of the top and consists of a double 45 degree angle with a polished finish.
LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are covered with a minimum 1/4″ radius. The liner has copper tubing firmly soldered to the top 3″ of all sides. A 3/4″ dia. drain with strainer, 4″ PVC nipple, and valve is provided.
INSULATION: The pan is full insulated with high density polystyrene, 1″ thick on all sides, 1-1/2″ thick on the bottom and enclosed with a 22 gauge galvanized steel outer liner.
BODY: End mullions are die-formed, 18 gauge paint grip steel, all welded box beam construction. Interior sides are enclosed with 20 gauge paint grip steel panels attached to the end mullions. End mullions are joined at the top, front and rear by an apron running the full-length of the unit; apron is 6-1/2″ on the front and 8″ on the rear. Corner sections are formed with 45 degree angles on the front of the designer look. End mullions are joined at the bottom with a full length angle iron frame, supporting a removable stainless steel bottom shelf. Steel surfaces are finished with urethane based paint.
FRONT AND SIDES: Constructed of rigidized honeycomb material with plyshield plywood stringers. Panel is framed with 5/8″ x 1″ polyethylene and a plastic laminate front. Rears is finished with a backing sheet to insure watertight integrity. OMNI: 45 degree designer corners are painted bright gray with a urethane based paint. Solid color mica panels in operator’s choice. OAKWOOD: 45 degree designer corners are mirror finish brass look. Light oak-look mica panels complete the appearance package. VISCAYA: 45 degree designer corners are, mirror finish brass-look. Rich mahogany-look mica front panels feature stained and sealed hardwood trim.
ADJUSTABLE CASTERS: NSF listed, 5″ dia. non-marking neoprene rubber tired swivel casters. Two casters have foot-operated locking brakes. All Designer Series unit feature Atlas’ exclusive adjustable height-leveling casters.
LOCKING DEVICES: When two or more units are ordered. Atlas’ unique CAM-LOCK™ locking system includes an exclusive interlocking stainless lock under the top counter on the customer’s side and a positive actions CAM-LOCK™ on the operator’s side.
ELECTRICAL: 15 amp, 120 volt, 60 cycle, single phase operation with an illuminated on/off switch located on the operator’s side and a 6′-foot long, 3-wire cord and plug (NEMA-5-15P). A cord holder is provided, under the end mullion on operator’s right, unless specified otherwise.
REFRIGERATION SYSTEM: A 1/4 HP (1/2 HP on DSRM-3285 only) self-contained condensing unit with a hermetically sealed compressor is provided along with a factory pre-set temperature pressure control, which is field adjustable. The condensing unit is provided with an enclosure of 18 gauge steel. A removable grill is included for air circulation and access to the refrigeration system.