Atlas Metal will be attending SNA ANC & NACUFS More Information.

Our products are now available in Revit More Information.

Atlas Metal will be closed on Memorial Day 2019 More Information.

  • Models:
  • DSCI-3240
  • DSCI-3254
  • DSCI-3268
  • DSCI-3285

Mobile Cold Serving Unit – DSCI Series

Ice Cold Pan

Ideal for breakfast bars, salad bars, or cold food bars—anything traditionally displayed on a bed of ice. The well is sized to accommodate full size (12″ x 20″) and fractional sized pans.

This attractive Designer Series unit can stand alone or become an integral part of your total serving system.

Quality construction, Atlas’ exclusive Reversa Panel and heavy gauge stainless steel tops promise years of cost efficient, trouble-free service.


TOP: Top constructed of 16 gauge, type 304 stainless steel, die-formed, welded, buffed and polished to a uniform finish. The cold pan is fully insulated with high density polystyrene, 1″ thick on all sides, 2″ thick on the bottom and enclosed with a 22 gauge galvanized steel outer The cold pan will accommodate 12″ x 20″ pans of 2-1/2″ and 4″ depth, and fractional size pans. OMNI and GALAXY: The edge runs the full length of the top and consists of a double 45 degree angle with a polished finish.

BODY: End mullions are die-formed, 18 gauge paint grip steel, all welded box beam construction. Interior sides are enclosed with 20 gauge paint grip steel panels attached to the end mullions. End mullions are joined at the top, front and rear by an apron running the full-length of the unit; apron is 6-1/2″ on the front and 8″ on the rear. Corner sections are formed with 45 degree angles on the front for the designer look. End mullions are joined at the bottom with a full length angle iron frame, supporting a removable stainless steel bottom shelf. Steel surfaces are finished with a urethane based paint.

FRONT AND SIDES: Constructed of rigidized honeycomb material with plyshield plywood stringers. Panel is framed with 5/8″ x 1″ polyethylene and a plastic laminate front. Rear is finished with a backing sheet to insure watertight integrity. OMNI: 45 degree designer corners are painted bright gray with a urethane based paint. Solid color mica panels in operator’s choice. GALAXY: 45 degree designer corners are painted bright red with a urethane based paint. Atlas’ unique “grid pattern” is permanently screened and laminated in the mica. OAKWOOD: 45 degree designer corners are mirror finish brass-look. Light oak-look mica panels complete the appearance package. VISCAYA: 45 degree designer corners are mirror finish brass-look. Rich mahogany-look mica front panels feature stained and sealed hardwood trim.

ADJUSTABLE CASTERS: NSF listed, 5″ dia. non-marking neoprene rubber tired swivel casters. Two casters have foot-operated locking brakes. All Designer Series units feature Atlas’ exclusive adjustable height, leveling caster.

LOCKING DEVICES: When two or more units are ordered. Atlas’ unique CAM LOCK™ locking system includes an exclusive interlocking stainless lock under the top counter on the customer’s side and a positive action CAM LOCK™ on the operator’s side.

ELECTRICAL: 15 amp, 120 volt, 60 cycle, single phase operation with an illuminated on/off switch located on the operator’s side and a 6′-foot long, 3-wire cord and plug (NEMA-5-15P). A cord holder is provided, under the end mullion on operator’s right, unless specified otherwise.



  • Reversa Panel easy access, reversible, interchangeable designer panels—available as an accessory
  • Chromeplated, die-cast CAM LOCK™ locking system
  • Adjustable height, leveling casters
  • Concealed, heavy-duty, non-marking neoprene wheels with locking brakes
  • Solid, die-cast brass or chromeplated brackets
  • Unibody construction with 45 degree designer look corner supports
  • Durable stainless steel tops
  • One person room-to-room mobility
  • All units fit through standard 36″ doors
  • Most flexible decor package in the industry