Atlas Metal will be attending SNA ANC & NACUFS More Information.

Our products are now available in Revit More Information.

Atlas Metal will be closed on Memorial Day 2019 More Information.

  • Models:
  • WCM-HP-2
  • WCM-HP-3
  • WCM-HP-4
  • WCM-HP-5
  • WCM-HP-6

Hot/Cold Pan – WCM-HP Series

Dual Temperature Hot or Cold Service | (For Hot Mode) Water Must Be Used

Two units in one! The versatile drop-in serving unit is a fully self-contained refrigerated cold pan or, at the flip of a switch, an electrically heated bain-marie. Your hot breakfast bar can be a refrigerated salad bar for lunch—with one piece of equipment.

The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4″ stainless steel drain.


TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface of the top to hold a full set of removable separator channels in place.

LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4″ radius. The liner has copper tubing firmly soldered to the exterior sides. A 3/4″ dia. drain with strainer, 4″ brass nipple, and valve is provided.

INSULATION: The pan is fully insulated with high density fiberglass, 1-3/8″ thick on all sides, 1-1/2″ thick on the bottom and enclosed with a 22 gauge galvanized steel outer case.

HEATING ELEMENT: An immersion type heating element is provided in the bottom of the pan along with a perforated stainless steel sheath cover. A thermostat control is included. Please note: the element must be submerged in water to operate properly.

REFRIGERATION SYSTEM: The compressor housing shall be fabricated from 14 gauge galvanized angles and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC-free refrigerant and ready to operate.

NOTE: Proper ventilation must be provided in counter.

ELECTRICAL: The unit is pre-wired with a hot/cold selector switch that prevents dual operation, with the required thermostat controls and pilot light. The unit is provided with a 6′-long, 3-wire cord and a twist lock plug.


*Model Shown: WCM-HP-3 – Not representative of final product


  • Dual Temperature—a hot serving unit becomes a refrigerated cold pan at the flip of a switch
  • Fully insulated for energy saving
  • Factory applied gasket makes installation a snap and seals units to the counter top, thus eliminating seepage
  • Accommodates standard 12″ x 20″ pans with the use of separator channel(s), or fractional size pans with the use of optional adapter bars
  • 1-Year Parts & Labor Warranty
  • NSF Certified; UL Listed