Atlas Metal will be attending SNA ANC & NACUFS More Information.

Our products are now available in Revit More Information.

Atlas Metal will be closed on Memorial Day 2019 More Information.

  • Models:
  • WH-2
  • WH-3
  • WH-4
  • WH-5
  • WH-6

Hot Pan – WH Series

Electrically Heated | Single Control

The WH series hot pan is a versatile, electrically heated drop-in serving unit that can be used as an open bain- marie or with standard 12″ x 20″ steam table pans. The pan construction enables the unit to be used wet. Its stainless steel inner liner is free of all obstructions for ease of cleaning.

The pan is fully insulated and provided with a factory applied gasket so that it can be installed in the finest wood fixtures, without marring the counter top. All units are furnished with a 3/4″ dia. drain and come in five convenient sizes, to accommodate two to six 12″ x 20″ steam table pans. Adapter bars are available for fractional size pans.

Specifications

TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface of the top to hold the removable adapter bars in place.

LINER: The inner liner shall be 18 gauge type 304 stainless steel, one piece construction, all welded ground and polished to a uniform finish. All corners are coved with a minimum 1/4″ radius. A 3/4″ dia. drain, with strainer, brass nipple, and valve is provided.

INSULATION: The pan is fully insulated with high density fiberglass insulation, 1″ thick on all sides, 2″ thick on the bottom and enclosed by a 22 gauge galvanized steel outer liner. The entire unit is removable without the use of tools.

ELECTRICAL: The unit is provided with individual 850 watt heating elements, pre-wired to a single thermostat control with a pilot light. A 6′-long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left. Available for single phase power only.

Render

*Model Shown: WH-3 – Not representative of final product

Features

  • Fully insulated to retaim heat—protects fixtures and saves energy
  • Open bain-marie construction
  • Thermostatically controlled
  • Factory applied gasket—makes installation a snap and seals units to the counter top, thus eliminating seepage
  • Accommodates standard 12″ x 20″ pans with the use of separator channel(s), or fractional size pans with the use of optional adapter bars
  • Wet operation
  • 1-Year Parts & Labor Warranty

Certifications