The Hot Food Cart is an attractive, functional unit designed to keep hot foods hot – at their peak of serving perfection. The modular cart base, with its drop-in bain-marie style heated pan will accommodate standard 12″ x 20″ steam table pans and can be used either wet or dry.
The attractive streamlined design, plus the variety of laminates give you a wide range of choices to complement any decor. The unmatched feature of the CA-Cart line is the self-locking device which eliminates loose fasteners or molding strips to lock units together. Simply push the units together; the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.
TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. Top is provided with an opening to receive the appropriate sized drop-in serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.
BODY: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 aluminum.
HOT SERVING UNIT: The cart is complete and includes a WH series drop-in hot serving unit installed in the top. Constructed of 18 gauge, type 304 stainless steel, open bain marie style with raised perimeter bead and solid vinyl gasket. The pan is fully insulated with high density fiberglass insulation, 1″ thick on all sides, 2″ thick on the bottom, and enclosed by a 22 gauge galvanized steel outer liner.
The interior liner is fabricated with 1/4″ radius coved corners and provided with a 3/4″ dia. drain, with strainer, brass nipple, and valve.
CASTERS: The casters shall be 5″ dia. non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.
ELECTRICAL: The unit is provided with 850 watt heating elements, pre-wired to a single thermostat control, with a pilot light. A 6′-long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left. Available for single phase power only