This full depth cold pan, 9-3/4″, has copper tubing wrapped around its side walls as well as the bottom, to meet the strictest health department codes. The drop-in pan can be installed in virtually any counter and can be provided as fully self-contained—just plug it in and turn it on, or remote, where there’s a need to locate the compressor at a different location.
The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4″ stainless steel drain. The cold pan accommodates standard 12″ x 20″ pans—perfect for any cold food serving application.
TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring the counter top. Embossed mounting lugs are provided along the inner surface of the top to hold the removable adapters in place.
LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4″ radius. The liner has copper tubing firmly soldered to the exterior bottom and all sides. A 3/4″ dia. drain with strainer, 4″ PVC nipple, and valve is provided.
INSULATION: The pan is fully insulated with high density
polystyrene, 1/2″ thick on all sides, 1-1/2″ thick on the bottom and enclosed with a 22 gauge galvanized steel outer case.
REFRIGERATION SYSTEM: The compressor housing shall be fabricated from 14 gauge galvanized angles and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC-free refrigerant and ready to operate.
NOTE: Proper ventilation must be provided in counter.
ELECTRICAL: The unit is pre-wired with a hot/cold selector switch that prevents dual operation, with the required thermostat controls and pilot light. The unit is provided with a 6′-long, 3-wire cord and a twist lock plug.
*Model Shown: WCMD-C-3 – Not representative of final product