The pass-through merchandise is the ideal display for all your pre-plated or pre-wrapped salads, desserts, and deli products. It’s also the perfect display for bottled juices and specialty drink items. Large sliding, self-closing glass doors on the operator’s side, as well as on the customer’s side, make loading a snap. The large display area is provided with adjustable height shelves and full lighting to enhance product display. The display case is fully self-contained and can be located anywhere in your serving line—just plug it in and turn it on.
The attractive streamlined design, plus the variety of laminates give you a wide range of choices to complement any decor. The unmatched feature of the CA-Cart line is the self-locking device which eliminates loose fasteners or molding strips to lock units together. Simply push the units together; the carts will automatically lock and the top will be flush and level, regardless of the floor’s condition. It’s the right cart for your serving line needs.
TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. Top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be provided to align and retain cart positioning when two or more carts joined.
BODY: Frame construction shall be of hi-tensile aluminum square tubing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and polished to a uniform finish. Body is complete with front panel of plastic laminate on .050 aluminum. Owner to specify finish.
DISPLAY CASE: Double wall constructed of type 304 stainless steel 20 gauge, both interior and exterior, and filled with 2″ of foamed-in-place polyurethane insulation. Customer’s side and operator’s side are provided with a set of two (2) sliding, self-closing, thermo-pane insulated glass doors. The doors are removable for ease of cleaning.
The display case is provided with two (2) plastic coated wire shelves, adjustable on 1″ increments and two (2) sets of fluorescent light fixtures mounted behind plastic guards, which are recessed into the side panels. The light fixtures are provided with a separate on/off switch. An internal thermometer is provided.
REFRIGERATED SYSTEM: The compressor housing shall be fabricated from formed 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided, with a hermetically sealed compressor and a thermostat control. The system is also provided with a forced air evaporator for even temperature throughout the display case, and drains into a condensate evaporator pre-wired in the unit. The system is fully charged with CFC-free refrigerant and ready to operate.
NOTE: Proper ventilation must be provided in counter.
ELECTRICAL: The unit will be wired for 15 amp, 120 volt, single phase operation with an on/off thermostat switch and pilot light. A 6′-long, 3-wire cord and plug (NEMA 5-15P) will be provided.
CASTERS: The casters shall be 5″ dia. non-marking rubber tired, swivel type with ball bearing, in both swivel and axle raceway, and provided with grease fittings. Both casters on operator’s side have foot-activated brakes.