Atlas Metal will be attending SNA ANC & NACUFS More Information.

Our products are now available in Revit More Information.

Atlas Metal will be closed on Memorial Day 2019 More Information.

  • Models:
  • BIT-1014
  • BIT-1216
  • BIT-1418
  • BIT-1520
  • BIT-1622
  • BIT-1821
  • BIT-2-1014

Built-In Tray Dispensers – BIT Series

For high volume tray dispensing | For cafeteria and tray make-up area

Cabinet sides and bottom shall be constructed of heavy gauge galvanized steel with a non-conductive perimeter top strip. Interior top of cabinet shall be reinforced with galvanized channel supports.


TRAY CARRIER: The tray carrier shall be grade 18-8 stainless steel removable for cleaning.

SELF-LEVELING: Elevators shall be stainless steel die stamped telescoping tubing, non-fatiguing compression type springs stainless steel totally enclosed.

OPTIONAL TOP SUPPORT FLANGE: Flange shall be constructed of heavy gauge grade 18-8 stainless steel. The flange edge is beveled for snug fit when installed in the counter top.

CORNER BUMPERS: Not included on this model.

CASTERS: Not included on this model.

INSTALLATION: The standard models BIT require a 11/16″ ID 90 degree counter brake down into the cabinet to opening. Bottom of cabinet must be supported.



  • Tray capacity approximately 100 to 150 trays per stack
  • Tray capacities vary with the type of trays used
  • Model BIT2-1014 dispenses two separate stacks of trays
  • NSF Approved