The Auto-Lift Table is the perfect match of mobility and stability for holding heavy slicers, mixers, grinders, or choppers. The table functions as a mobile stand and when the legs are extended, has the strength and stability of a regular fixed work table. Save the expense of extra equipment when one unit can be rolled to several locations.
Fully welded, all stainless steel construction, this unit provides years of trouble-free service. The control handle is conveniently located on the table apron and with a few turns, can easily lift up to 500 pounds.
TOP: Constructed of 14 gauge, type 304 stainless steel with coved corners, fully welded, ground and polished to a uniform finish. Top is fabricated with a 3/8″ raised marine edge on all sides and is removable for access to the lift mechanism.
CHASSIS: Constructed of structural steel angle frames, welded to four stainless steel legs to support the lift mechanism. A double, 7″ high apron, constructed of 18 gauge stainless steel shall surround the perimeter immediately below the top to enclose and protect the lift mechanism.
LEGS: Telescoping legs are constructed of 16 gauge stainless steel tubing—outer sleeves to be 1-7/8″ diameter; inner legs to be 1-5/8″ diameter. Inner legs are provided with adjustable bullet feet.
LIFT MECHANISM: The unit shall be equipped with a mitre gear box, controlled by a composition plastic control wheel mounted in the apron. The gear box is supported by a 6” x 1-1/2” x 3/16” structural steel channel, welded to the top frame and securely fastened to the top by “X” shaped, 1/2” thick structural steel cross bars for even weight distribution. Maximum lift capacity is 500 pounds.
BOTTOM SHELF: Constructed of 18 gauge, type 304 stainless steel with structural steel underbracing, fully welded to the table legs.
CASTERS: NSF approved, 5″ dia. non-marking rubber tired wheels with swivel plate.
*Model Shown: LTM-2736-ME – Not representative of final product