Top: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface of the top to hold the removable adapter bars in place.
Liner: The inner liner shall be 18 gauge type 304 stainless steel, one piece construction, all welded ground and polished to a uniform finish. All corners are coved with a minimum 1/4″ radius. A 3/4″ dia. drain, with strainer, brass nipple, and valve is provided.
Insulation: The pan is fully insulated with high density fiberglass insulation, 1″ thick on all sides, 2″ thick on the bottom and enclosed by a 22 gauge galvanized steel outer liner. The entire unit is removable without the use of tools.
Electrical: The unit is provided with individual 850 watt heating elements, pre-wired to a single thermostat control with a pilot light. A 6′-long, 3-wire cord and plug is provided, extending from the control box located under the unit, on operator’s left. Available for single phase power only.
