Top: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded, ground and polished. The top is provided with an opening to receive the appropriately sized drop-in unit.
Body: Frame construction shall be of hi-tensile stainless steel square tub-ing, 1-1/4″ x 1-1/4″. Frame sections are welded construction, ground and pol-ished to a uniform finish. Body & panel is constructed from 18 gauge stainless steel with 1/16” thick plastic laminate Front & ends. rear aprons is constructed fron 16 gauge stainless steel with 1/16” thick plastic laminate fin-ish. Owner to specify finish. An integral locking device shall be provided to align and retain cart positioning when two or more carts are joined.
Display Case: The cart includes a WCPT Series drop-in refrigerated dis-play case installed in the top. Double wall constructed of type 304 stainless steel – 20 gauge, both interior and exterior, and filled with 2″ of foamed-in-place polyurethane insulation. Customer’s side and operator’s side are pro-vided with a set of two (2) sliding, self-closing, thermo-pane insulated glass doors. The doors are removable for ease of cleaning. The display case is provided with two (2) plastic coated wire shelves, adjustable on 1″ incre-ments, and two (2) sets of fluorescent light fixtures mounted behind plastic guards which are recessed into the side panels. The light fixtures are pro-vided with a separate on/off switch. An internal thermometer is provided.
Refrigerated System: The compressor housing shall be fabricated from formed 14 gauge galvanized and bolted to the base of the unit. A fully self-contained condensing unit is provided, with a hermetically sealed compressor and a thermostat control. The system is also provided with a forced air evaporator for even temperature throughout the display case, which drains into a condensate evaporator pre-wired in the unit. The system is fully charged with CFC free refrigerant and ready to operate.
Electrical: The unit will be wired for 15 amps., 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6′ long, 3-wire cord and plug (NEMA 5-15P) will be provided.
Casters: The casters shall be 5” diameter, non-marking rubber tired, swivel type with ball bearings in both swivel and axle raceways, provided with grease fittings. Both casters on operator’s side have toe activated brakes.
