Counter Top
Drop-in Units
Food Guard Accessories
Modular Units BL Series
Modular Units CA series
Modular Units Designer Series
Self Leveling Dispensers
Slide-in Units
Slim-Line Drop-Ins
Special Application Drop-In Units
Photo Gallery
Printed Catalogs
CAD, Revit, & Spec Sheets
Color Charts
Laminate Choices
Authorized Service Centers
Sales Representatives
Customer Service
about us
Atlas Metal Industries, Inc.
Mercury Corporation
Visiting Atlas
Catalog | Slim-Line Drop-Ins
Slim-Line Ice Cream Freezer - WDF-L Series
Refrigerated, Self-Contained

* Units with these accessories are not currently UL listed.

The WDF-L series slim-line ice cream deep freeze lets you bring the profitability of reach-in ice cream service to your serving line. Ideal for ice cream or any frozen dessert, this drop-in can be installed in virtually any counter, as little as 16-1/2" wide!, and is fully self-contained - just plug it in and turn it on.

The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The interior is constructed of stainless steel and is provided with a 3/4" stainless steel drain. The deep freeze is also perfect for a beer mug or salad plate chiller and can be specified with a Plexiglas lid.


  • Slim-line configuration - it can install in counters only 16-1/2" wide
  • Fully insulated for maximum efficiency and energy savings
  • Factory applied asket - makes installation a snap and seals units to the counter top, thus eliminating seepage
  • Ideal for any frozen dessert or use it as a mug or plate chiller
  • NSF Certified and UL recognized
  • 1-Year Parts & Labor Warranty


TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top.

LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius on the horizontal edges and a minimum 3/4" radius on the vertical edges. The liner has copper tubing firmly soldered to the exterior sides and bottom. The unit is provided with an all stainless steel, insulated, hinged, lift off lid, with plastic coated pulls.

INSULATION: The unit is fully insulated with high density polystyrene, 2-1/2" thick on all sides, and enclosed with a 22 gauge galvanized steel outer liner.

REFRIGERATION SYSTEM: The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and ready to operate.

NOTE: Proper ventilation must be provided in counter.

ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6' long, 3-wire cord and plug (NEMA 5-15P) will be provided.


  • 5YW - 5-Year Compressor Warranty
  • Hinged Plexiglas Lid
  • LLD - Lid Locking Device
  • 2060-1 - Condensate Evaporator
  • RS - Remote On/Off Switch for counter mounting
  • * 220 Volt - 50 Cycle Compressor

Spec Sheets
Trouble Shooting
Service & Installation Manual