search
home
catalog
Counter Top
Drop-in Units
Food Guard Accessories
Modular Units BL Series
Modular Units CA series
Modular Units Designer Series
Self Leveling Dispensers
Slide-in Units
Slim-Line Drop-Ins
Special Application Drop-In Units
Photo Gallery
Printed Catalogs
CAD, Revit, & Spec Sheets
Color Charts
Laminate Choices
contacts
Authorized Service Centers
Sales Representatives
Customer Service
about us
Atlas Metal Industries, Inc.
Mercury Corporation
Visiting Atlas
Catalog | Slim-Line Drop-Ins
Slim-Line Cold Pan (3 - RML Series
Refrigerated, With Side Coils
Self-Contained, or Remoted

RML-2

RML-3

RML-4


Description

The RML Series refrigerated cold pan eliminates the mess and expense of ice in your cold food displays. The slim-line design can be installed in extra narrow width counters. The unit is used with standard 12" X 20" pans, in the long configuration, and the overall cold pan will require only 19-1/4" of clear counter space!

The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4" stainless steel drain.

Features

  • Slim-line configuration - it can install in counter only 19-1/4" wide
  • Fully insulated for maximum efficiency and energy savings
  • Factory applied gasket - makes installation a snap and seals units to the counter top, thus eliminating seepage
  • Accommodates standard 12"X 20" pans with the use of separator channel(s) and pan rails, or fractional size pans with the use of optional adapter bars
  • NSF Certified; UL Recognized
  • 1-Year Parts & Labor Warranty

Specifications

TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface, 3" down from the top, to hold the pan rails and a full set of removable separator channels in place.

LINER: The inner liner shall be 18 gauge, type 304 stainless steel with 3" recessed top, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. The liner has copper tubing firmly
soldered to the top 3" on all sides. A 3/4" dia. drain with strainer, 4" PVC nipple, and valve is provided.

INSULATION: The pan is fully insulated with high density polystyrene, 1" thick on all sides, 2" thick on the bottom and enclosed with a 22 gauge galvanized steel outer liner.

REFRIGERATION SYSTEM: The compressor housing shall be fabricated from formed angles and bolted to the base of the unit. A Fully self-contained condensing unit is provided, with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and ready to operate.

NOTE: Proper ventilation must be provided in counter

ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase operation, with an on/off switch and pilot light. A 6' long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Accessories

  • 5YW - 5-Year Compressor Warranty
  • WFBL - Stainless steel perforated false bottom
  • Stainless Steel adapter bars (pgs. DI-51-52)
  • Stainless Steel adapter plates (pgs. DI-51-52)
  • CPL - Cover Plate with handles, S/S
  • 2060-1 - Condensate Evaporator
  • RS - Remote on/off switch for counter mounting
  • RDVE - Rear Drain Valve Extension
  • * 220 Volt - 50 Cycle Compressor

Spec Sheets
Trouble Shooting
Warranty