search
home
catalog
Counter Top
Drop-in Units
Food Guard Accessories
Modular Units BL Series
Modular Units CA series
Modular Units Designer Series
Self Leveling Dispensers
Slide-in Units
Slim-Line Drop-Ins
Special Application Drop-In Units
Photo Gallery
Printed Catalogs
CAD, Revit, & Spec Sheets
Color Charts
Laminate Choices
contacts
Authorized Service Centers
Sales Representatives
Customer Service
about us
Atlas Metal Industries, Inc.
Mercury Corporation
Visiting Atlas
Catalog | Slim-Line Drop-Ins
Slim-Line Cold Pan - WCML Series
Refrigerated Self-Contained 4-5/8" Standard Depth
WCML-2

WCML-3

WCML-4


* Units with these accessories are not currently UL listed.
Description

The slim-line design can be installed in extra narrow width counters. The unit is used with standard 12" x 20" pans, in the long configuration, and the overall cold pan will require only 16" of the clear counter space! The cold pan is available in the standard 4-5/8" depth and the 9-3/4" full depth.

The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that it can be installed in the finest wood fixtures without marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4" stainless steel drain.

Features

  • Slim-Line configuration - it can install in counters only 16" wide
  • Fully insulated for maximum efficiency and energy savings
  • Factory applied gasket - makes installation a snap and seals units to the counter top, thus eliminating seepage.
  • Accommodates standard 12"x20" pans with the use of separator channel(s), or fractional size pans with the use of optional adapter bars
  • 1-Year Parts & Labor Warranty
  • NSF Certified and UL Recognized

Specifications

TOP: Constructed of 18 gauge, type 304 stainless steel, die
stamped with a raised perimeter bead. There shall be a solid
vinyl gasket under the beaded edge to form a seal to the
counter top, thus preventing seepage or marring of the
counter top. Embossed mounting lugs are provided along the
inner surface of the top to hold a full set of removable
separator channels in place.

LINER: The inner liner shall be 18 gauge, type 304 stainless
steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. The liner has copper tubing firmly soldered to the exterior bottom. A 3/4" dia. drain with strainer, 4" PVC nipple, and valve is provided.

INSULATION: The pan is fully insulated with high density polystyrene, 1" thick on all sides, 1-1/2" thick on the bottom and enclosed with a 22 gauge galvanized steel outer case.

REFRIGERATION SYSTEM: The compressor housing shall
be fabricated from 14 gauge galvanized and bolted to the
base of the unit. A fully self-contained condensing unit is provided,
with a hermetically sealed compressor and a thermostat
control. The system is fully charged with CFC free
refrigerant and ready to operate.

NOTE: Proper ventilation must be provided in counter.

ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6' long, 3-wire cord and plug (NEMA 5-15P) will be provided.

Accessories

  • 5YW - 5-Year Compressor Warranty
  • WFBL - Stainless steel perforated false bottom
  • Stainless Steel adapter bars (pg DI-51-52)
  • Stainless Steel adapter plates (pg DI-51-52)
  • CPL - Cover Plate with handles, S/S
  • 2060-1 - Condensate Evaporator
  • RS - Remote on/off switch for counter mounting
  • RDVE - Rear Drain Valve Extension
  • * 220 Volt - 50 Cycle Compressor
  • These units have not been performance tested for use with potentially hazardous foods, and must be used with ice.

Spec Sheets
Trouble Shooting
Warranty
Service & Installation Manual