search
home
catalog
Counter Top
Drop-in Units
Food Guard Accessories
Modular Units BL Series
Modular Units CA series
Modular Units Designer Series
Self Leveling Dispensers
Slide-in Units
Slim-Line Drop-Ins
Special Application Drop-In Units
Photo Gallery
Printed Catalogs
CAD, Revit, & Spec Sheets
Color Charts
Laminate Choices
contacts
Authorized Service Centers
Sales Representatives
Customer Service
about us
Atlas Metal Industries, Inc.
Mercury Corporation
Visiting Atlas
Catalog | Drop-in Units
Hot/Cold Pan - RM-HP Series
(3" Recessed Top)
Dual Temp.
Hot or Cold Service
(For Hot Mode)
Water Must Be Used

RM-HP-1

RM-HP-2

RM-HP-3

RM-HP-4

RM-HP-5

RM-HP-6


Description

Two units in one! This versatile drop-in serving unit is a fully self-contained refrigerated cold pan or, at the flip of a switch, an electrically heated bain marie. Your hot breakfast bar can be a refrigerated salad bar lunch - with one piece of equipment.

The pan is fully insulated for maximum efficiency and energy savings, and is provided with a factory applied gasket so that is can be installed in the finest wood fixtures without marring the counter top. The pan is constructed of stainless steel and is provided with a 3/4" stainless steel drain.

Features

  • Dual Temp. - a hot serving unit becomes a refrigerated cold pan at the flip of a switch
  • Fully insulated for maximum efficiency and energy savings
  • Factory applied gasket - makes installation a snap and seals units to the counter top, thus eliminating seepage
  • Accommodates standard 12" X 20" pans with the use of separator channel(s) and pan rails, or fractional size pans with the use of optional adapter bars
  • 1-Year Parts & Labor Warrant
  • NSF Certified and UL Recognized

Specifications

TOP: Constructed of 18 gauge, type 304 stainless steel, die stamped with a raised perimeter bead. There shall be a solid vinyl gasket under the beaded edge to form a seal to the counter top, thus preventing seepage or marring of the counter top. Embossed mounting lugs are provided along the inner surface, 3" down from the top, to hold the pan rails and a full set of removable separator channels in place.

LINER: The inner liner shall be 18 gauge, type 304 stainless steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. The liner has copper tubing firmly soldered to the top 3" on all sides. A 3/4" dia. drain with strainer, 4" PVC nipple, and valve is provided.

INSULATION: The pan is fully insulated with high density fiberglass, 1-3/8" thick on all sides, 1-1/2" thick on the bottom and enclosed with a 22 gauge galvanized steel outer case.

HEATING ELEMENT: An immersion type heating element is provided in the bottom of the pan along with a perforated stainless steel sheath cover. A thermostat control is included. Please note: the element must be submerged in water to operate properly.

REFRIGERATION SYSTEM: The compressor housing shall be fabricated from galvanized formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and ready to operate.

NOTE: Proper ventilation must be provided in counter

ELECTRICAL: The unit is pre-wired with a hot/cold selector switch that prevents dual operation, with the required thermostat controls and pilot light. The unit is provided with a 6" long, 3-wire cord and a
twist lock plug.

*: Units with these accessories are not currently UL listed.

Accessories

  • 5YW - 5-Year Compressor Warranty
  • Stainless Steel adapter bars (pgs. DI-51-52)
  • Stainless Steel adapter plates (pgs. DI-51-52)
  • CP - Cover Plate with handles, S/S
  • AF - Automatic water fill
  • * 220 Volt - 50 Cycle Compressor
  • RDVE - Rear Drain Valve Extension

Spec Sheets
Warranty
Service & Installation Manual