Counter Top
Drop-in Units
Food Guard Accessories
Modular Units BL Series
Modular Units CA series
Modular Units Designer Series
Self Leveling Dispensers
Slide-in Units
Slim-Line Drop-Ins
Special Application Drop-In Units
Photo Gallery
Printed Catalogs
CAD, Revit, & Spec Sheets
Color Charts
Laminate Choices
Authorized Service Centers
Sales Representatives
Customer Service
about us
Atlas Metal Industries, Inc.
Mercury Corporation
Visiting Atlas
Catalog | Slim-Line Drop-Ins
Slim-Line Cold Pan - WCMDL Series
Refrigerated Self-Contained 9-3/4" Full Depth



* Units with these accessories are not currently UL listed.

The slim-line design can be installed in extra narrow width counters. The unit is used with standard 12" x 20" pans, in the long configuration, and the overall cold pan will require only 16" of the clear counter space! The cold pan is available in the standard 4-5/8" depth and the 9-3/4" full depth.


  • Slim-line configuration - it can install in counters only 16" wide
  • Accommodates your deepest pan or insert - 9-3/4" deep
  • WCMDCL units have refrigerated copper tubing around all sides and base - meets your toughest health department standards
  • Fully insulated for maximum efficiency and energy savings
  • Factory applied gasket - makes installation a snap and seals units to the counter top, thus eliminating seepage
  • Accommodates standard 12" X 20" pans with the use of separator channel(s), or fractional size pans with the use of optional adapter bars.
  • 1-Year Parts & Labor Warranty
  • NSF Certified and UL Recognized


TOP: Constructed of 18 gauge, type 304 stainless steel, die
stamped with a raised perimeter bead. There shall be a solid
vinyl gasket under the beaded edge to form a seal to the
counter top, thus preventing seepage or marring of the
counter top. Embossed mounting lugs are provided along the
inner surface of the top to hold a full set of removable
separator channels in place.

LINER: The inner liner shall be 18 gauge, type 304 stainless
steel, one piece construction, all welded, ground and polished to a uniform finish. All corners are coved with a minimum 1/4" radius. The WCMDL liner has copper tubing firmly soldered to the exterior BOTTOM ONLY. The WCMDCL liner has copper tubing firmly soldered to the exterior BOTTOM AND ALL SIDES. 4" dia. drain with strainer, 4" PVC nipple, and valve is provided.

INSULATION: The pan is fully insulated with high density
polystyrene, 1" thick on all sides, 1-1/2" thick on the bottom
and enclosed with a 22 gauge galvanized steel outer case.

REFRIGERATION SYSTEM: The compressor housing shall
be fabricated from 14 gauge galvanized angles and bolted to the base of the unit. A fully self-contained condensing unit is provided, with a hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and ready to operate.

NOTE: Proper ventilation must be provided in counter

ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6' long, 3-wire cord and plug (NEMA 5-15P) will be provided.


  • 5YW - 5-Year Compressor Warranty
  • WFBL - Stainless steel perforated false bottom
  • Stainless Steel adapter bars (pg DI-51-52)
  • Stainless Steel adapter plates (pg DI-51-52)
  • CPL - Cover Plate with handles, S/S
  • 2060-1 - Condensate Evaporator
  • RS - Remote on/off switch for counter mounting
  • RDVE - Rear Drain Valve Extension
  • * 220 Volt - 50 Cycle Compressor
  • These units have not been performance tested for use with potentially hazardous foods, and must be used with ice.

Spec Sheets
Trouble Shooting
Service & Installation Manual